5 Easy Electrical Tips to Help You Build Your Dream Home
When people walk through your home, they will have first impressions. Have you thought about where you’ll put an outlet in each room? Have you thought about what kind of light switches or wiring you’ll need?
When installing electricity, there are many things to think about, so it’s essential to do your research. Start with a plan, make sure every room in your house has its circuit, and have your electrician run the wires through the attic instead of the walls.
This is safer and allows more wiring to be done. It might cost more, but everyone will be safer in the long run. To help you overcome this task, let us look at five electrical tips when building a new home:
1. Plan Your Wiring System Before You Start Building
Because the wiring is installed after your home is built, you may think that it doesn’t need to be thought of until you’re ready to live in the house. This is a big mistake because you can do a lot of wiring ahead of time.
While many people think it is easier to install wiring after the building is complete, you can do it ahead of time. This way, the electrician can work on wiring without waiting for walls to be finished, and you can focus on other parts of the build.
2. Set Aside a Dedicated Circuit for Every Room
It’s not enough to just give each room a general circuit for lighting. You need to consider the electronics in each room and how many outlets you’ll need. All electronics need to be grounded and having too many outlets can cause problems with your electrical system.
This means that you need to have one circuit for each room of the house (excluding bathrooms, laundry rooms, garages, and other areas that traditionally do not have a lot of electronics).
3. Have a Dedicated Circuit for Appliances
You also need to think about the appliances in your home. Your washer and dryer, dishwasher, and other large appliances must be on their circuit.
This means that you may have different circuits for different parts of the house (such as your laundry circuit running through the kitchen or your garage circuit running through the living room).
4. Consider How Often You’ll Be Using the Circuits
When you’re planning for the circuits and want to know what to put where you should consider how often those circuits will be running. If you know that the circuit running through your kitchen will be used to run your stove, fridge, and other appliances, you’ll want to put a more powerful circuit there.
If you’re just planning on having a light in the kitchen and a few outlets, you can save lots of money by using less powerful circuits. When you consider what will be using the power source, you get to design your circuits with more purpose.
5. Have Your Electrician Run the Wiring Through the Attic Instead of the Walls
You should never run wiring through the walls or floors unless it’s in a separate conduit. If you’re not planning on running wires through the attic, then make sure to put the wiring in a steel box to be easily found in the future if you need it.
If you’re running wires through the attic, make sure you install them where you can easily access them if you ever need to make any repairs.
Conclusion
Powering your home is one of the essential parts of building a house, but it can also be overlooked. Don’t forget about the wiring if you’re building your own home. It will reduce efficiency, but you’ll also have to deal with it if something breaks or sparks and catches fire. Plan carefully to stay within your budget and get a better system for your home.
Are you looking for residential electrical services in Southern Alberta? Passey Electric is an electrical company that provides complete electrical solutions for home, agricultural wire, and commercial properties. Working with us means you won't have to worry about out-of-pocket expenditures in the event of a mistake or disaster since we are professionally trained and fully insured. Contact us now and talk to one of our specialists.